296 SERIES,

FLAT FACE COUPLING (CARBON STEEL), ISO-16028 STANDARD, CONNECT UNDER PRESSURE, PLUG

? APPLICATIONS:

296 series male couplings will connect by hand with residual pressure up to 25 MPa/3625 psi locked in the hydraulic circuit. It will connect with residual pressure without releasing

any fluid into the environment. The mating circuit will need to be without residual pressure. Mobile equipment & attachment tools where exposure to the sun or temperature change causes pressure to develop due to thermal expansion of trapped fluid. Any application where static pressure can get locked into the system.

? INTERCHANGE

STUCCHI APM SERIES,PARKER FEC SERIES,

CEJN X64 SERIES,FASTER 3FFH SERIES,

DNP PLK4 SERIES,SAFEWAY FFEC49 SERIES,

DIXON HTE SERIES,HOLMBURY HCP SERIES

? PERFORMANCE

? TEMPERATURE RANGE

-20oC+100oC/-4oF+212oF

With standard seals: Buna-N(Nitrile)

? MAX. WORKING PRESSURE

? Threads

Threads: ISO1179-1,ANSI B1.20.1,ISO11926-1& SAE J1926-1

? MATERIAL

Coupler Body :STEEL, TRIVALENT PLATED

Springs :C98

Balls :GCr15

Seals :Buna-N(Nitrile)

Back-Up Ring :PTFE 

Surface treatment :1)QPQ finish,then Zinc plating and Cr 3+ 

2)Zinc Nickel plating1200 hours with no

red rust in salt spray tests

? ATTENTION:

Only coupler and nipple with the same thread fit together. 

Threads: BSP, NPT, SAE, ORFS, JIC.