Find high quality 100watt grade hm022-3p2s with competitive price here. Please rest assured to buy 100watt grade hm022-3p2s with Hangzhou Grand Technology Co.,Ltd

Description
Slip rings of the HM series are specially fit for small or miniature rotating system of transmitting low controlling signal. Applies noble precious metal reduced noises and interferences between circuits, low friction torque assures long life-span.
Models are available in 4, 6, 12, 18, 24, 30, 36, 46 and 56 circuits with 2A each.

Features
? Compact design
? Compatible with data bus protocols
? No maintenance
? Operating smoothly and reliability
? Convenient to assembly
? Extremely low electrical noise
? Precious metal contact ensures long life-span

Benefits

? Compact for ease of incorporation in small mechanisms.

? Outstanding signal handling capability to transfer the most demanding communication protocols

Options

? Operation speed, current &voltage	? Power ring with 5A and 10A is available
? Connector	upon 2A rings combination
? No. of circuits	? Compatible with digital signal and analog
? Housing material	signal such as RS series signal, data bus
? Position of wire outlet	protocols, Ethernet signal and so on.
? Protection level (dust and water)

Electrical Parameters

Circuit	5 circuits
Rated Voltage	240VAC/240VDC
Rated Current	20A/ring,3rings;2A/ring,2rings
Dielectric  Strength	500VAC@60Hz,60s between each circuit
Insulation Resistance	1000MO/500VDC
Electrical Noise	<0.01O
Lead length	Standard 250mm

Machinery Technology Parameter

Operating Speed	0-500rpm
Working Temperature	-40? - +80?
Working Humidity	=75%
Contact Material	Precious Metal
Structure Material	Engineering Plastic or Metal
IP Rating	IP 54
Operational life	= 5,000,000 cycles (Depends upon working temperature, rotating speed,  environment and continuous working time)

Outline dimesion unit

Installation Guide
1.Capsule slip ring is designed for being installed with flange on a sleeve bracket.
2.Rotor must be concentric driven by a flexible link (such as plastic tube or screw tube). Rotor lead wire can
do as this driver at limited-speed.
3.As the photograph shows, screws with washer can be used to install slip ring, these washers can avoid flange
too tight.

Attentions
1.Slip ring can not support the weight of equipment which connects with it, rotating equipment should be
fastened so that its weight will no fall on the rotor.
2.Slip ring should be used in dry, low dust environment. If used outdoor, shield is necessary.
3.The surface of lead wire should avoid being damaged while equipment rotating, all lead wire can not bear
weight while you put the lead wire in order.
4.No damaging the surface of lead wire while barking its end.