Find high quality hand operated rack jack with competitive price here. Please rest assured to buy hand operated rack jack with Hebei LiNuoDun Lifting Equipments Manufacturing Co.,Ltd

Hand Operated Rack Jack

Jack is divided into hydraulic jack, mechanical jack and pneumatic jack. The hand operated rack jack is a kind of mechanical jack.

Rack jack is made up of rack, gear, handle etc. A rotating head is placed above the bearing rack to place the lifting load. When used, as long as the handle is shaken, the tooth will drive the rack up or down, so that the weight will rise or fall. Sometimes the lifting load can be placed on the side of the convex ear, but in this case, because the rack is subjected to eccentric loading, the allowable weight can only be half of the rated weight. In order to support the load that it holds, prevent the landing of gravity from being equipped with a safe rocker device.

 

Technical Parameter:

Item No.		1.5T	3T(L)	5T(L)	10T(L)	16T	20T	25T
Rated Capacity	T	1.5	3	5	10	16	20	25
Test Capacity	KN	16.5	33	55	110	176	220	275
Chain shake to lift full load	N	190	196	235	431	580	650	750
main measurement(mm)	A	77	83	105	123	135	135	155
	B	110	130	170	173	150	150	200
	C	600-900	720-1090	737-1095	794-1175	830-1130	880-1180	950-1360
	D	60-360	70-425	87-445	100-481	115-425	115-425	110-520
	E	55	54	63	71	85	85	90
	F	40	45	64	74	85	85	90
	G	102	165	202	220	182	182	230
	H	225	285	285	330	360	360	360
	K	121	190	190	260	281	281	380
	R	119	156	156	185	224	224	212
	S	260	275	275	280	202	202	205
	T	133	133	133	258	258	258	258
Net weight		10.7	21.3(24.5)	27(30)	47(53)	64.5	72	91

Attentions

1?Before using the jack, you should first check the reliability of the brake gear and the braking device, and to ensure that the top can be activated when the action.

2?The rack and gear of the jack shall be free of crack or broken teeth, the handle and all parts shall be complete, and the connection is correct and reliable before use.

3?Jack should be used to place the whole solid, the bottom should be paved with a solid pad to expand the support area, the top and the object contact should also be padded with wood, can prevent the weight was crushed, but also to prevent the jack when the pressure slip off.

4?When lifting the top, the jack must be placed vertically and does not allow overload to ensure safe use.

5?The lifting height of the jack shall not exceed the required travel.

6?When you drop the jack, you can not drop suddenly to avoid the impact of the internal structure of the jack and cause heavy vibration and overturning.

7?The rack, gear and other parts must be kept clean and tidy to prevent sand and dirt from blocking gear and rack parts, increasing resistance and reducing service life. The jack must be regular cleaning and oiling.