Product no.:

OODA-835Y

Appearance:

Yellow Transparent Stick

Softening point:

86? ± 3?

Viscosity(180?):

13500 ± 500 CPS

Components:

EVA resin, tackifying resin, paraffin, additives, etc.

Features:

Adhering plastic smooth and difficult adhere surface. / High Softening Point.. / Can replace Pressure Sensitive Adhesives/supper bonding

Application:

Adhering plastic smooth and difficult adhere surface. / All type plastic film laminating.

Usage:

Insert glue stick inside the glue gun and connect 220V power supply. It can be used after being preheated for ten minutes. The operating temperature is 160?~180?.

Packing & Storage

Paper bags packing, 25Kg/bag. Stored in a cool and dry place, storage period is two years.

Note:

1.Opening and curing time will vary with the temperature at which the adhesive is heated, coating amount, sticking period and the strength.
2.The temperature of the melting system is high, please do not touch it with your hand in order to avoid scald.
3.If the glue drop on the skin, the burnt part should be immediately immersed in cold water for at least 15 minutes and then sent to hospital to be treated.

About us:

we also developed special application for HMA series and Pressure Sensitive Adhesive series

Special Conditions of Hazardous Reaction

No hazardous reaction

Situation should be Avoided

Should avoid heating over 200 ?

Material should be Avoided

Should avoid contact with strong oxidant

Hazardous Decomposition

Hydrocarbons, Carbon Dioxide, Smoke, and Water.