Find high quality hydraulic chain cutter with competitive price here. Please rest assured to buy hydraulic chain cutter with SIT Machinery Co., Ltd.

Using methods and points for attention

1,,26-1, this series is used to cut off 42mm chain (chain) metals. When used according to the anchor chain (chain) diameter adjustment bolt, chain (chain) placed in perpendicular to the head ...

2, first fill the pump manually when using 32# anti-wear hydraulic oil and pump quick connector docking with the master cylinder, bi-directional pump with two hoses connected machines on two interfaces, attention when using the cutter head forward or backward direction, rotating reversing switch control of bi-directional pump head direction of advance and retreat.

3. empty before using several processes, departments and flexible movements, leakage-free to use.

4. when using null phenomenon, can loosen fuel screw on the pump body, pump body vertically up, head down hitting a few times, excluding air inside the pipe, and then tighten the screws, you can continue to use it.

5. when there is a load, do not remove quick connector to avoid accidents and damage to parts

6. check the oil: If oil not enough could not perform the machine performance. Some poor big exception is part of the oil is enough to produce.

7. After cutting, knife blade does not allow material. Otherwise head blocked the body damage.

8. the harder more ductile steel must calculate the maximum cutting force and the short head to fly out wounded men, be safe.

9. chronic lying, should be stored in a dry and no corrosive gas environment.