Find high quality ice making machine with competitive price here. Please rest assured to buy ice making machine with NAT Refirgeration Equipment Manufacture Co.,Ltd.

Through the water supplement valve, automatic water into a water storage tank, and then through the flow control valve water to shunt head through a water pump is sent to,where water is sprayed evenly onto the surface ice maker, as through the ice makerwall like a curtain, water is cooled to the freezing point, instead of being frozen water willevaporate through the multi hole slot flow into the water storage tank, start the work cycle.

When the ice reaches the required thickness (the thickness can be selected by the operator / user arbitrary), the compressor exhaust gas is returned to the ice maker clipwall, replacing the liquid refrigerant in low temperature. So that the formation of a film ofwater between the ice and the evaporation tube wall, this layer of water film will be on the ice by gravity free fall into the lower groove, play the role of lubrication. And the iceperiod in the water through a multi hole slot back to the water storage tank, this will also prevent the wet ice was machine discharge.

The water storage tank of the chilled water evaporator with pump continuouslycirculated through the plate or lattice;

The operation of the compressor after suction compression exhaust condensation(liquefied) - throttle - again in the evaporator evaporation vaporization by low temperature -10 to -18 degrees. The freezing of water at a temperature of 0 degrees in continuous on the evaporator surface more low temperature condenses into ice. Whenthe ice condenses to a certain thickness, the refrigerant evaporation temperaturereaches the set temperature control after defrosting electromagnetic valve is turned on,often with a heat pump ice removal, and then realize the next cycle.

The ice making process

Through the water inlet valve, automatic water into a water storage tank, and thenpumped to the shunt shunt tube through the water pump, water uniformly flow to theevaporator temperature liquid refrigerant cooled, water cooled to the freezing point, thecooled to the freezing point of water will solidify into ice, but not be frozen waterevaporator flow into the water storage tank through the water pump, to re start the cyclework.

When the ice reaches the required thickness, into the ice shedding state, the high-pressure gas compressor discharge drainage to the evaporator through the reversing valve, replace the liquid refrigerant in low temperature. So that the formation of a film of water between the ice and the evaporator, the film of water to make ice off theevaporator by gravity, ice free falling ice storage tank into the following in.