Find high quality jolt squeeze moulding machine for casting with competitive price here. Please rest assured to buy jolt squeeze moulding machine for casting with Qingdao Puhua Heavy Industrial Group

The Jolt Squeeze Moulding Machine is suitable for batch production of single sided pattern plate and single flask moulding of small castings,can make cope flask and drag flask.

The Jolt Squeeze Moulding Machine own simple air control system,easy operation,flexible use and convenient repair and maintenance.

The Jolt Squeeze Moulding Machine Special Features

The Jolt Squeeze Moulding Machine Noise Controlled

The Jolt Squeeze Moluding Machine Combined Jolt Squeeze

The Jolt Squeeze Moluding Machine Accurate Centreline Draw

The Jolt Squeeze Moluding Machine Variable Jolt Timers

The Jolt Squeeze Moluding Machine Operational Roller on Pin Lift Draw

The Jolt Squeeze Moluding Machine Operational Safety Guards

The Jolt Squeeze Moulding Machine Work principle

The worktable fall and collide with floating shock-iron,and the sand was tighted slightly, and then to compaction,get the top and bottom of sand mould are tight. The slightly shock is high frequency (500-1000 times/min), small amplitude (5-25 mm) vibration instead of low frequency (60-120 times/min), the large amplitude vibration. The Jolt Squeeze Molding Machine made of sand mold are good quality, the basic requirement is also lower.

The Jolt Squeeze Moulding Machine Work Technical Parameters

Item	Unit	Z144
Max dimension of flask	mm	500×400×180
Worktable dimension	mm	560×465
Air pressure	Mpa	0.6
Compressive strength	KN	42
Jolting load	KN	2.6
Compacting stroke	mm	120
Draw stroke	mm	150
Distance between worktable to pressure head	mm	170-190
Productivity	Mould/h	40-60