Find high quality nimonic 901 with competitive price here. Please rest assured to buy nimonic 901 with Liaoning EO Technology Co.,Ltd

This alloy is  widely used in aeroengine in foreign countries and the ground gas turbine under  650 ? work rotating  parts and fasteners, a longer service life. It is also used in aviation  engines, and is a mature alloy that has been tested.
 Alloy forging,  if the process parameter is selected or operated not right, its performance  will show the obvious direction, and may cause the notch sensitivity, but as  long as the strict process, this phenomenon will not occur. The expansion  coefficient of the alloy is close to that of the iron alloy steel, so that the  two materials can be connected to the heat account without special provisions.

Nimonic 901
Chemical Composition
C	Cr	Ni	Mo	Al	Ti	Fe	B
0.02~0.06	11.0~14.0	40.0~45.0	5.0~6.5	=0.30	2.8~3.1	remainder	0.01~0.02
Mn	Si	P	S	Cu	Bi	Pb	Ag
=0.50	=0.40	=0.020	=0.008	=0.20	=0.0001	=0.001	=0.0005

 

Nimonic 901Thermal Properties
?/?		100		200			300	400		500			600		700		800		900		1000
?/(W/(m·C))		12.0		13.5			15.1	16.7		18.2			19.8		21.2		22.8		24.3		25.1
Coefficient of Linear Expansion
?/?	20~100		20~200		20~300				20~400		20~500			20~600		20~700		20~800		20~900
a/10-6C-1	13.5		14.0			14.4			14.9			15.1		15.2		15.5		16.0		16.5

Thermal Diffusivity
?/?	20	100	150	250	350	450	550	650	950
Q/(10-6m2/S))	2.66	2.93	3.00	3.18	3.47	3.73	3.78	4.02	4.11

 

Electrical Resistivity
?/?	20	100	200	300	400	500	600	700	800	900
p/(10-6O.M))	1.073	1.095	1.132	1.162	1.199	1.229	1.254	1.275	1.309	1.316

 

Nimonic 901 Oxidation Resistance: the oxidation rate after 100 hours of experiment in the air medium.

Chemical Performance
?/?	600	700	800	900	1000
Oxidation rate(g/(m3·h))	0.0072	0.014	0.0522	0.1665	0.2367

Density: ?=8.21g/cm3
 Magnetic Energy Type: Alloy  nonmagnetic.
 Decay resistance: The  alloy is prone to corrosion resistance in hydrochloric acid solution.

Product Description

The Nimonic 901alloy has good thermal forming  property.

• Forge

The  larger ingot is not allowed to cool directly to room temperature, but should be  moved directly into the forging furnace to prevent cooling and reheating  through the aging temperature range. Ingots should be forged to the maximum  length of 205mm square billet, and then quickly cold and trim. When forging,  the technological parameters should be strictly controlled to prevent the  occurrence of serious and uneven grain size, which can ensure the stable  performance.

• Weld

Argon  arc welding can be done with Nimonic 901 alloy wire.

• Part heat treatment process.

The  heat treatment of engine turbine disc should avoid heating too fast.

Product Application

 Product Show

Our Service

• Spot delivery, including delivering small batches of goods

• Provide wide-range and complete materials series products

• Cutting plates, including complex shapes of materials and special  processing and disposal

• Cutting bars and strips

• Our application technology expert provide the best material and  recommendation

• One-stop service