Technical parameter: 

1.Processing thickness:                                        3~40mm

2.Dia:                                                               100~2200mm

3.Max.width of bevel:                                       35mm

4.Bevel degree:                                                 0°~45°

5. degree of vacuum should be reached:              -0.08MPa~-0.1MPa

6. water pressure:                                               0.1MPa~0.2MPa

7. Air source pressure:                                        0.6MPA~0.8MPa

8. Rotating speed of working table:                      0.3rpm~3rpm

9. Rotating speed of independent turnplate:          0.7rpm~7rpm