Min.Order : 1 Pieces Quick Quotation >
Conpany Profile
Product Details
Table of technical parameters;
Items | Parameter | Unit | Parameter Value (SSF1680) | ||
Injection Unit | Screw diameter | mm | A | B | C |
42 | 45 | 50 | |||
Screw L/D ratio | L/D | 23.6 | 22 | 19.8 | |
shot volumn (theoretical) | Cm3 | 311 | 357 | 441 | |
injection weight(PS) | g | 283 | 325 | 402 | |
plasticizing capacity | g/s | 10 | 11.5 | 14.2 | |
injection rate | g/s | 138 | 160 | 196 | |
injection pressure | Mpa | 203 | 177 | 143 | |
screw speed | rmp | 180 | |||
Clamping unit | clamp force | KN | 1680 | ||
open stroke | mm | 435 | |||
distance between tie bars (W*H) | mm | 460*460 | |||
max mould thickness | mm | 520 | |||
min mould thickness | mm | 180 | |||
ejector stroke | mm | 135 | |||
ejector force | KN | 50 | |||
ejector number | PC | 5 | |||
dia of mould location hole | mm | 125 | |||
Others | max pump pressure | Mpa | 16 | ||
pump motor power | KW | 18.5 | |||
heating power | KW | 12.3 | |||
machine dimension | m | 5.13*1.45*2.12 | |||
machine weight | T | 6 | |||
oil tank capacity | L | 300 |
Notes:(1)Theoretical injection volume=screw diameter×screw stroke;
(2)Actual injection weight is 91% of the theoretical volume;
(3)All the data is PS values.
Remark: Above-mentioned technical parameters are all theoretical values in 50HZ operation state. The technical parameters are subject to change for technical improvement without notice.
Recommend Product