Find high quality titanos flowing agent scsa 358 with competitive price here. Please rest assured to buy titanos flowing agent scsa 358 with Shanghai Titanos Industry Co.,Ltd

TITANOS flowing agent SCSA 358

Description

Polyacrylate based surface additive for solvent-borne coating systems and ambient curing plastic systems to improve leveling. For semi-polar to polar systems.

Product Data

Composition

Solution of a polyacrylate

Typical Properties

The values indicated in this data sheet describe typical properties and do not constitute specification limits.

Density (20 °C): 0.95 g/ml

Non-volatile matter (10 min., 150 °C): 52 %

Solvents: Alkylbenzenes

Flash point: 47 °C

Applications

Coatings Industry

Special Features and Benefits

The additive is used as an anti-cratering and leveling additive in all solvent-borne coatings. It increases gloss and gives the coatings a long wave effect. It only causes a minor reduction in surface tension and does not negatively influence the recoatability and intercoat adhesion. PBSA-358 does not cause turbidity in clear coats or haze in pigmented systems. The additive is thermally stable.

Recommended Levels

0.1-1 % additive (as supplied) based upon total formulation.

The above recommended levels can be used for orientation. Optimal levels are determined through a series of laboratory tests.

Incorporation and Processing Instructions

The additive can be incorporated during any stage of the production process, including post-addition.

Ambient-curing Plastic Systems

Special Features and Benefits

The additive is used as an anti-cratering and leveling additive in all solvent-borne and solvent-free systems.

It only provides a minor reduction of the surface tension and facilitates the acceptance of spray mist and dust. PBSA-358 does not cause turbidity in non-pigmented systems or haze in pigmented systems.

Recommended Use

The additive is recommended for all ambient curing resin systems such as unsaturated polyester resins and epoxy resins.

Recommended Levels

0.1-0.5 % additive (as supplied) based upon total formulation.

The above recommended levels can be used for orientation. Optimal levels are determined through a series of laboratory tests.

Incorporation and Processing Instructions

The additive can be incorporated during any stage of the production process, including post-addition.